McMillan S114 Flow Meters are constructed from stainless steel, rated for up to 500 psig (34.5 barg), and are capable of measuring extremely low liquid flow rates from 13 mL/min up to 10 L/min with a full scale accuracy of ± 1.0% or better.
McMillan S114 Flow Meters are constructed from stainless steel, rated up to 500 psig (34.5 barg), and are capable of measuring extremely low liquid flow rates from 13 mL/min up to 10 L/min with a full scale accuracy of ± 1.0% or better. A wide variety of fluids may be measured. Repeatable results are achieved using a Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a well-deserved reputation for continuous operational service or many years without failure.
Because of the compact size and affordable cost of these products, the S Series are suitable for a wide variety of industrial, commercial, laboratory and OEM applications. Some sample applications include measurement of hydrocarbon fluids, fuels, light oils, solvents, coolant, pesticides, acids, alkalis, and deionized water.
NIST Traceable certificates are available on all models. A backlit LCD display is integrated into each unit and is programmed to read in mL/min and L/min.
Flow ranges from 13-100 mL/minute up to 1.0-10.0 L/minute are available. Consult the factory for custom requirements.
Most units may be specified to operate with either 12VDC or 24VDC power. Various power adapters are also available for use with 12VDC versions.
An analog 0-5VDC output is provided on all units.
All models have a standard accuracy specification of ±1% F.S. (including linearity). An improved accuracy specification of ±0.5% is available. NIST traceable calibration certificates are standard for improved accuracy (“H”) models and optional for standard units.
All units have compression type tube fittings as standard. See the Product Configurator for fitting options.
Units have an integrated 4-pin male connector. To complete connections, either a cable assembly or power adapter should be ordered.
A flow rate display is integrated into each unit and is programmed to read in mL/minute for ranges 3-6, and L/minute for flow ranges 7-10.
Compact size
Standard: ±1.0% Full Scale
“H” suffix: ±0.5% Full Scale
±0.2% Full Scale
500 psig (34.5 barg)
Operating Range: 41 to 131 ºF (5 to 55 ºC)
Storage Range: 32 to 158 ºF (0 to 70 ºC)
±0.2% F.S. or less per ºC
316 Stainless
PPS
Epoxy
Glass
Sapphire
FKM
Stainless Steel
25 microns or less
Low viscosity (<10 cS)
Translucent or Transparent
Minimum amount of entrained air
Standard
Non-Isolated, 2500 ohm minimum load
128x32 pixel backlit LCD
“B” Suffix: 24 VDC @ 40 mA (18-25 VDC)
"D" Suffix: 12 VDC @ 75 mA (11.5-15 VDC)
Typically <1 second for 97% of final value
100,000 Hours MTBF (testing ongoing)
CE Approved
89/336/EEC (EN 55011 & EN 50082-1)
73/23/EEC Low Voltage Directive
IP 10 (NEMA 1)
| Categories | Title | Summary | File Size | Download |
|---|---|---|---|---|
| Data Sheets (PDF) | S SERIES_DS-S1X-L 2410 A.pdf | Latest data sheet for the S Series For Liquids | 2 MB |
We are experts in all things flow. As a company founded and run by engineers, we seek to understand your application and then build a product solution that will solve your most difficult challenges.
McMillan Flow sales agents are strategically located across the
globe. Find your nearest distributor or office.
McMillan Company
7075 Ranch Rd 2338
Georgetown, TX 78633
sales@mcmflow.com
Phone: (844) MCM-FLOW
Copyright © 2024 McMillan Flow Products. All Rights Reserved.
McMillan Flow Products is located in the U.S.A. and all products are manufactured in our Texas plant.
"*" indicates required fields
