McMillan 106F Flow Sensors feature PTFE construction, male flare fittings, a U-shaped flow path, and work well in corrosive applications. Units are available that measure liquids as low as 13 mL/minute and as high as 50 L/minute. Full scale accuracies of ±1.0% or better are available on select models.
McMillan 106F Flow Sensors feature PTFE construction, male flare fittings, a U-shaped flow path, and work well in corrosive applications. Units are available that measure liquids as low as 13 mL/minute and as high as 50 L/minute. Full scale accuracies of ±1.0% or better are available on select models.
A wide variety of liquids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a well deserved reputation for continuous operational service for many years without failure.
Because of the compact size and economical cost of these products, the 10X Series Flow Sensors are suitable for a wide variety of industrial, commercial, laboratory and O.E.M. applications. Some sample applications include measurement of hydrocarbon fluids, fuels, light oils, solvents, coolant, pesticides, mild acids, alkalis, and deionized water. Several power and output configurations are available, including both pulse and analog outputs. NIST Traceable certificates are available on most models.
Units are available that measure liquids as low as 13 mL/minute and as high as 50 L/minute.
Most units may be specified to operate with either 12 VDC or 24 VDC power.
The Model 106F has multiple options available, including 0-5 VDC, pulse, and 4-20 mA.
All units with analog outputs have a standard accuracy specification of ±1% F.S. (including linearity). Pulse output units have an accuracy specification of ±3.0% F.S. NIST traceable calibration certificates are optional.
Model 106F units feature integrated PTFE male flare fittings. Alternate sizes may be selected as noted in Product Configurator.
Model 106F units feature an integrated cable with pigtail leads.
Units feature PTFE, FFKM, and sapphire wetted parts.
A number of remote displays are also available for use with any flow sensor and flow meter.
Analog Output: ±1.0% Full Scale
Pulse Output: ±3.0% Full Scale
±0.2% Full Scale
Working Pressure: 60 psig (4 barg)
Overpressure Limit: 100 psig (6.8 barg)
Operating Range: 41 to 131 ºF (5 to 55 ºC)
Storage Range: 32 to 158 ºF (0 to 70 ºC)
±0.2% F.S. or less per ºC
PTFE
Sapphire
FFKM
25 microns or less
Low viscosity (<15 cS), translucent or transparent, degassed
Non-isolated, 2500 ohm minimum load
7.5VDC peak buffered square wave, 0-400 Hz typical
Non-isolated, current loop should not exceed 500 ohms
22 to 25 VDC @ 65 mA
Typically <1 second to 67% of final value
CE Approved; 89/336/EEC (EN 55011 & EN 50082-1)
73/23/EEC Low Voltage
Directive UKCA
IP53 (NEMA 2)
1 Year Limited
We are experts in all things flow. As a company founded and run by engineers, we seek to understand your application and then build a product solution that will solve your most difficult challenges.
McMillan Flow sales agents are strategically located across the
globe. Find your nearest distributor or office.
McMillan Company
7075 Ranch Rd 2338
Georgetown, TX 78633
sales@mcmflow.com
Phone: (844) MCM-FLOW
Copyright © 2024 McMillan Flow Products. All Rights Reserved.
McMillan Flow Products is located in the U.S.A. and all products are manufactured in our Texas plant.
"*" indicates required fields
