McMillan 104 Flow Sensors feature stainless steel construction and precision microturbine technology. Units are available that measure liquids as low as 13 mL/minute and as high as 10 L/minute. Full scale accuracies of ±1.0% or better are available.
McMillan 104 Flow Sensors feature stainless steel construction and precision microturbine technology. Units are available that measure liquids as low as 13 mL/minute and as high as 10 L/minute. Full scale accuracies of ±1.0% or better are available.
A wide variety of liquids may be measured. Repeatable results are achieved using a patented Pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a well deserved reputation for continuous operational service for many years without failure.
Because of the compact size and economical cost of these products, the 10X Series Flow Sensors are suitable for a wide variety of industrial, commercial, laboratory and O.E.M. applications. Some sample applications include measurement of hydrocarbon fluids, fuels, light oils, solvents, coolant, pesticides, mild acids, alkalis, and deionized water. Several power and output configurations are available, including both pulse and analog outputs. NIST Traceable certificates are available on most models.
Units are available that measure liquids as low as 13 mL/minute and as high as 10 L/minute.
Most units may be specified to operate with either 12 VDC or 24 VDC power. Various power adapters are also available for use with 12 VDC versions.
Most units may be ordered with a 0-5 VDC output, a pulse output, or with both.
Standard accuracy specification of ±1% F.S. including linearity. An improved accuracy specification of ±0.5% is available on some models. NIST traceable calibration certificates are standard for improved accuracy (“H”) models and optional for standard units.
Units feature compression tube fittings. Alternate fitting types and sizes may be selected as noted in the Product Configurator.
All models have an integrated 4-pin male connector. To complete connections, either a cable assembly or power adapter should be ordered.
The Model 104 features a stainless steel body and stainless steel fittings.
A number of remote displays are also available for use with any flow sensor and flow meter. Please request further information from the factory.
Analog Output: ±1.0% Full Scale
“H” Option (Analog Output): ±0.5% Full Scale
Pulse Output: ±3.0% Full Scale
±0.2% Full Scale
500 psig (34 barg)
Operating Range: 41 to 131 ºF (5to 55 ºC)
Storage Range: 32 to 158 ºF (0 - 70ºC)
±0.2% F.S. or less per ºC
316L SS
303 SS
Epoxy
Glass
Sapphire
FKM
25 microns or less
Low viscosity (<15 cS), translucent or transparent, degassed
Non-isolated, 2500 ohm minimum load
7.5VDC peak buffered square wave 0-400 Hz typical
Not available
Power 12 VDC units: 11.5 to 15 VDC @ 35 mA
24 VDC units : 22 to 25 VDC @ 35 mA
Typically <1 second to 67% of final value
CE Approved
89 / 336 / EEC (EN 55011 & EN 50082-1)
73 / 23 / EEC Low Voltage Directive
UKCA
IP10 (NEMA 1)
1 Year Limited
We are experts in all things flow. As a company founded and run by engineers, we seek to understand your application and then build a product solution that will solve your most difficult challenges.
McMillan Flow sales agents are strategically located across the
globe. Find your nearest distributor or office.
McMillan Company
7075 Ranch Rd 2338
Georgetown, TX 78633
sales@mcmflow.com
Phone: (844) MCM-FLOW
Copyright © 2024 McMillan Flow Products. All Rights Reserved.
McMillan Flow Products is located in the U.S.A. and all products are manufactured in our Texas plant.
"*" indicates required fields
